CERAMICSPEED Coated Derailleur Pulleys For SRAM Eagle 1×12-speed 14 Tooth

The CeramicSpeed Coated derailleur pulleys for SRAM Eagle 1×12-speed have 14 teeth with narrow-wide-design and are based on smooth, resilient and highly efficient ceramic bearings. In addition, the bearing races of the bearings were coated with metal.

You can find hazardous substance labelling, hazard, safety and application instructions for the supplied grease or oil under the product descriptions for CeramicSpeed All Round Grease or CeramicSpeed Oil for Derailleur Pulleys.
Technical Information:Application:Cross Country, Enduro, All MountainCompatibility:SRAM EagleTeeth:14Gearing:12-speedMaterial:aluminiumBearings:626 ceramicCompatibility:SRAM Eagle 1×12-speed mechanicalSRAM Eagle 1×12-speed AXSFeatures:high-performance bearings with special ceramic balls made of grade 3 silicon nitride (best achievable degree for ceramic bearings)CeramicSpeed bearing balls: 15% harder, 100% smoother and 99% more resilient than commercially available ceramic ballsball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channeladditional metal-coated race for more performance and durabilityenergy savings thanks to greatly reduced friction, higher top speed thanks to improved power transfer14 teeth with narrow-width profilehandmade in DenmarkTechnology:Ceramic Bearings by CeramicSpeed
CeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It’s not about seconds, it’s about minutes!

Coated
CeramicSpeed coated products offer the ultimate in performance and durability. This is achieved by a unique coating that increases the hardness of the races, so that in combination with the smoothness of CeramicSpeed ball bearings, there is virtually no bearing wear. The coating is a metal layer that is 75% harder than hardened steel. It is applied very thinly (0.003 mm) and evenly over the entire surface of the race and is used both internally and externally for optimum results.
Manufacturer Numbers:black:103346gold:103347Contents:1 x CeramicSpeed SRAM Eagle Coated lower derailleur pulley1 x CeramicSpeed SRAM Eagle Coated upper derailleur pulley1 x CeramicSpeed oil, 15 ml dropper bottle1 x CeramicSpeed grease, 5 ml syringe1 x sticker sheet