CERAMICSPEED OSPW X Coated Derailleur Pulley System SRAM Rival 1 T. 3 – Limited Ed.

The CeramicSpeed OSPW X Coated Limited Edition derailleur pulley system for SRAM Rival and Force 1 Type 3 rear derailleurs consists of a 14-tooth upper pulley, an 18-tooth lower pulley – both with narrow-wide profile for better chain retention – and a carbon-polyamide cage. The ceramic bearings are characterised by their special load capacity and were specially designed for off-road applications. Their races are coated with metal for additional durability. CeramicSpeed has chosen the colour green for its Limited-Edition derailleur pulleys because green symbolises hope.

For hazard warnings, safety and application information, please see CeramicSpeed Oil for Derailleur Pulleys.
Specifications:Application:Gravel, Cyclocross, RoadGearing:11-speedCassette Teeth (max.):42-toothCompatibility:SRAM Rival 1X, Force 1X, Type 3 rear derailleur with 8 o’clock cage lock position (not for Apex 1, Type 2.1 or 5 o’clock position)Technical Information:Derailleur Pulleys:14 tooth (upper derailleur pulley), 18 tooth (lower derailleur pulley)Outer Cage Material:polyamide, carbonInner Cage Material:polyamide, carbonOther Materials:aluminiumBearings:607 ceramicFeatures:high-performance bearings with special ceramic balls made of grade 3 silicon nitride (best achievable degree for ceramic bearings)CeramicSpeed bearing balls: 15% harder, 100% smoother and 99% more resilient than commercially available ceramic ballsball bearing retainer made of reinforced polyamide, race made of stainless steeladditional metal-coated race for more performance and durabilityunique durability and performance: energy savings of up to 2.4 watts, up to 40% less friction thanks to the OSPW systemspecial off-road version for wet, dirt and mudNarrow-Wide tooth profiletwo spring tension options: lower tension recommended to fully maintain damping function, higher tension if necessary on very rough surfacescompatible with all cage lengthshandmade in DenmarkLimited Edition with green derailleur pulleysTechnology:Ceramic Bearings by CeramicSpeed
CeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It’s not about seconds, it’s about minutes!

OSPW
The Oversized Pulley Wheel System (OSPW System) is a breakthrough innovation by CeramicSpeed, developed in collaboration with world-class triathletes. This unique system is known for 40 – 60% less friction compared to standard derailleur pulleys and allows power savings of at least 1.6 and up to 2.4 watts. The OSPW system features the unique CeramicSpeed bearing, aluminium derailleur pulleys and a polyamide-carbon cage, making it 3 to 5 times more durable than standard systems on the market. A real advance in the field of cycling performance.

Coated
CeramicSpeed coated products offer the ultimate in performance and durability. This is achieved by a unique coating that increases the hardness of the races, so that in combination with the smoothness of CeramicSpeed ball bearings, there is virtually no bearing wear. The coating is a metal layer that is 75% harder than hardened steel. It is applied very thinly (0.003 mm) and evenly over the entire surface of the race and is used both internally and externally for optimum results.

X Offroad
Dirt, rain, mud and gravel are the most important components of a true off-road adventure. But these conditions put a lot of strain on your components and force you to change the bottom bracket, hub bearings and derailleur pulleys frequently. CeramicSpeed Offroad bearings extend the life of the most stressed parts of the bike and reduce friction. Designed to withstand the harshest conditions, they allow you to go longer, harder and faster. With their stainless steel races, they are corrosion resistant and offer exceptional performance.

Note from the manufacturer:The rear derailleur should be completely removed before transporting the bicycle in a travel bag, otherwise the OSPW System could be damaged.

Manufacturer Number:green:108155Contents:1 x CeramicSpeed OSPW X Coated derailleur pulley system for SRAM Rival Type 31 x CeramicSpeed oil, 15 ml dropper bottle1 x sticker sheet