Dt-swiss 350 Classic Fatbike 6-bolt Disc Front Hub

The 350 Classic 6-bolt Disc Front Hub by DT Swiss – Swiss precision for fat bikes
This 350 front hub from DT Swiss for use with classic J-Bend spokes, with its installation dimension of 15 x 150 mm, fits fatbikes with 6-hole brake rotors. The end caps are shaped in such a way that uncomplicated and, above all, quick disassembly is possible. This is an advantage especially during races, but easy wheel removal is also an asset if you have a second wheelset that you use depending on the course or conditions. The sturdy aluminium hub body ensures a long service life, as do the steel bearings. The bearing play has been minimised and optimised. This is made possible by preloading the bearings before the hub is not clamped in the frame. Once fastened with the thru-axle, the preload is released and the bearings are maximally slidable. Thanks to the precision seals, they are also excellently protected against moisture and dirt.
Specifications:Application:All Mountain, City & TouringBrake Type:6-bolt discTechnical Information:Body Material:aluminiumBearings:steel bearingsSeals:precision sealFeatures:quick disassembly possible thanks to the special shape of the end capsoptimised bearing clearance due to preloading before the hub is installed100% Swiss-madeModels:15 x 150 mm / 32 hole:
Over Locknut Dimension:15 x 150 mm thru-axleSpoke Hole Count:32 holeFlange Distance (L/R):47.4 mm / 47.4 mmPartial Bolt Circle Diameter (L/R):58.0 mm / 58.0 mmManufacturer Number:H350LDIXR32SA1859SContents:1 x DT Swiss 350 Classic Fatbike 6-bolt Disc front hub