Dt-swiss CRC 1100 SPLINE 38 Carbon Disc CL 28″ Tubular Wheelset

DT Swiss CRC 1100 SPLINE 32 Carbon center lock disc 28″ tubular wheelset – competition bikes for Cyclocross riders
The CRC 1100 SPLINE wheelset from DT Swiss gives you a carbon foundation in 28″ for your Cyclocross bike. The rim is intended for tubular tyres. The SINC ceramic bearings are durable and corrosion resistant. With straight pull spokes and a reinforced hub, the SPLINE body withstands even the toughest off-road use. The wheels are especially light, which allows you to accelerate quickly. This is particularly advantageous during competitions.
Specifications:Application:CyclocrossWheel Size:28″Tyre Type:tubularNumber of Spokes:24Brake Type:Center Lock DiscTechnical Information – Rim:Dimensions (ETRTO):26-622Rim Width:26 mmDepth:38 mmValve Hole Diameter:SV/Presta (6.5 mm)Rim Material:CarbonTechnical Information – Front Hub:Type:240 straight pullOver Locknut Dimension:12 x 100 mm thru-axle, can be converted to a 15 x 100 mm thru-axle or a 9 x 100 mm quick releaseBearings:Ceramic bearings (SINC)Body Material:aluminiumTechnical Information – Rear Hub:Type:240 straight pullOver Locknut Dimension:12 x 142 mm thru-axle, convertible to 10 x 135 mm quick releaseBearings:Ceramic bearings (SINC)Body Material:aluminiumFreehub Body Material:aluminiumFreehub Body:Ratchet 36Technical Information – Lacing:Front Lacing Pattern:2-crossRear Lacing Pattern:2-crossSpoke Type:DT Aero Comp straight pullSpoke Material:stainless steel (18/10)Nipple Type:DT Pro SquorxNipple Size:15 mm (length) / 2 mm (diameter)Nipple Material:aluminiumApproved For:Weight Limit:120 kg (system weight)Technology:Intended use – Category 2
Suitable for use on predominantly paved and partially unpaved ground with a slight slope and a temporary loss of ground contact as well as drops of up to 15 cm.

SPLINE
Straight pull hubs, straight spokes and strong rims result in a durable wheel. It can therefore be reliably used in training and competition.

Ratchet System
The robust and reliable star ratchets freehub system can be maintained easily and quickly. The no-tool concept contributes to this, because it allows disassembly without any tools. The freehub has two ratchets which engage simultaneously. This means that the contact surface is large and the point load is kept small, which relieves the material and allows the freehub to work particularly reliably and precisely.

Pro Lock
The nipple thread is coated with two-component adhesive to increase the durability of the wheels. It can still be re-trued several times without any problems, but the adhesive strength decreases slightly. The connection between the spoke and nipple cannot loosen by itself.

SINC
Robust steel bearing rings are combined with ceramic balls. This means that the rolling resistance is low. The rolling resistance is further reduced by the seal on the outside and a protective ring on the inside. Furthermore, the combination of materials prevents corrosion between the ring and balls. This increases the durability of the ball bearings.
Colour Info:black:
Rim: blackHubs: black-silverSpokes: blackNipples: blackModels:28″ set (front 12×100 + rear 12×142) Shimano:
Freehub:Shimano RoadGearing:8-/9-/10-/11-/12-speedNote:Assembly of 8-/9-/10-speed cassettes on Shimano Road freehub bodies requires a 1.85 mm spacer.Manufacturer Numbers:WCRC110AIDXCA07135 + WCRC110NIDJCA07138Contents:1 x DT Swiss CRC 1100 SPLINE Carbon wheelset (front and rear wheel)1 x DT Swiss SRAM XDR freehub body2 x DT Swiss wheel bags2 x valve protectors