HOPE Pro 4 + Fortus 30 SC Disc 29″ Boost Wheelset W/ Aluminium Freehub

Hope Pro 4 + Fortus 30 SC Disc 29″ Boost Wheelset w/ aluminium freehub – Less weight with the same performance
The Hope Fortus 30 SC Disc 29″ Boost wheelset is characterised by high stiffness and was developed for heavily-used enduro and trail mountain bikes. The single-cavity rims consist of a continuous cavity, which means a weight reduction of a good 10 % compared to the regular version. At the heart of the wheels are the proven Hope Pro-4 hubs. The rear wheel is equipped with a lightweight aluminium freehub.

If you prefer an even more robust steel freehub, such as for an e-mountain bike, then check out the Pro 4 + Fortus 30 SC Disc 29″ Boost wheelset with steel freehub from Hope.
Guidelines for Replacing E-bike Components:Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.

Application:All Mountain, EnduroWheel Size:29″Tyre Type:clincher tyreNumber of Spokes:32Brake Type:6-bolt discWheel Standard:BoostTubeless System:Tubeless ReadyTechnical Information – Rim:Type:Hope Fortus 30 SCRim Flange:with flangeDimensions (ETRTO):30-622Inner Width:30 mmOuter Width:35 mmDepth:20 mmValve Hole Diameter:SV / Presta (6.5 mm)Rim Material:aluminium (6061-T6)Technical Information – Front Hub:Type:Hope Pro 4Over Locknut Dimension:15 x 110 mm thru-axleBearings:stainless steel cartridge bearing (sealed)Body Material:aluminium (2014-T6)Technical Information – Rear Hub:Type:Hope Pro 4Over Locknut Dimension:12 x 148 mm thru-axleBearings:stainless steel cartridge bearing (sealed)Body Material:aluminium (2014-T6)Freehub Body Material:AluminiumFreehub Body:ratchet system (4 pawls) w/ 44 tooth engagement (8.2°)Technical Information – Lacing:Front Lacing Pattern:3-crossRear Lacing Pattern:3-crossSpoke Type:Sapim Race / J-Bend / round / triple buttedSpoke Size:291 mm / 292 mm (front l/r), 292 mm / 291 mm (rear l/r)Spoke Material:stainless steelNipple Material:brassApproved For:Weight Limit:
Air Pressure (max.):4.1 bar (55 psi)Recommended Tyre Width:2.4″ – 2.8″Features:29″ wheelset with aluminium freehub for trail and enduro MTBs with Boost dimensionsSingle Cavity rim saves weightPro-4 hub set with extra-high flange for greater rigidity and more stabilityless idling due to 44 engagement points on the freehubeyeletstubeless ready with tubeless valves and tape included in deliveryModels:29″ set (front 15×110 Boost + rear 12×148 Boost) Shimano:
Freehub:Shimano MTBGearing:8-/9-/10-/11-speedManufacturer Number:HFW29F30SCP4STN11 + HRW29F30SCP4STN148SA
29″ set (front 15×110 Boost + rear 12×148 Boost) Shimano Micro Spline:
Freehub:Shimano Micro SplineGearing:12-speedManufacturer Number:HFW29F30SCP4STN11 + HRW29F30SCP4STN148MS
29″ set (front 15×110 Boost + rear 12×148 Boost) SRAM XD:
Freehub:SRAM XDGearing:11-/12-speedManufacturer Number:HFW29F30SCP4STN11 + HRW29F30SCP4STN148XDContents:1 x Hope Pro 4 wheelset + Fortus 30 Single Cavity (front wheel and rear wheel)2 x tubeless rim tape rolls 32 mm2 x tubeless valves2 x valve cap1 x cleaning cloth