Shimano OT-RS900 Shifter Cable Housing – 1 Pack

The OT-RS900 shift cable housing by Shimano – For current 11-speed road rear derailleurs
The Shimano OT-RS900 shift cable housing is required for Dura-Ace RD-R9100, Ultegra RD-R8000, 105 RD-R7000 and other current 11-speed road or gravel rear derailleurs. The reason for this is the smaller radius that results when routing the cable from the frame to the rear derailleur, which cannot be created with the stiff standard OT-SP41 cable housing. The OT-RS900 is 240 mm long and has a diameter of 4 mm.
Specifications:Application:RoadDiameter:4 mmLength:240 mmRecommended Cable Diameter:1.2 mmTechnical Information:Liner:polyethyleneCompatibility:RD-R9100RD-R8000RD-R7000RD-RX810RD-RX812RD-RX400Features:pre-lubricated with special silicone grease to ensure smooth shiftingNote from the manufacturer:The length of the OT-RS900 should be adjusted accordingly depending on the bicycle frame size. This is necessary for optimal performance. The OT-RS900 should be cut from the correct side when adjusting the length. One of the two ends is flare-processed. This flare-processed end is inserted into the barrel adjuster of the rear derailleur and should therefore remain there.
Technology:OT-RS900
For Dura-Ace RD-R9100, Ultegra RD-R8000, 105 RD-R7000 and other 11-speed road or gravel rear derailleurs, Shimano has developed the special OT-RS900 cable housing. It is less stiff than the conventional OT-SP41 housing and is therefore better suited to the tight curve where the cable is routed from the frame to the rear derailleur. Thanks to OT-RS900, problems with the barrel adjuster can be prevented and the rear wheel can be removed more easily. OT-RS900 is not intended for use on the shift/brake lever side.
Manufacturer Numbers:black:Y-0BM98011white:Y-0BM98021hi-tech grey:Y-0BM98041red:Y-0BM98031Contents:1 x Shimano OT-RS900 shifter cable housing1 x end caps, sealed, for rear derailleur1 x Shimano long pointed end caps