Shimano OT-RS900 Shifter Cable Housing – 10 Pack

Shimano shift cable housing OT-RS900 for modern 11-speed road rear derailleurs – 10 Pack
The Shimano shift cable OT-RS900 housing must be used with current road and gravel rear derailleurs such as Dura-Ace RD-R9100, Ultegra RD-R8000, 105 RD-R7000, etc., as the cable is routed between the frame and the rear derailleur in a smaller radius. Standard OT-SP41 housing proves to be too stiff for this purpose. Ten OT-RS900 housings are supplied, each 240 mm long.
Specifications:Application:RoadDiameter:4 mmLength:240 mmRecommended Cable Diameter:1.2 mmTechnical Information:Liner:polyethyleneCompatibility:RD-R9100RD-R8000RD-R7000RD-RX810RD-RX812RD-RX400Features:pre-lubricated with special silicone grease to ensure smooth shiftingNote from the manufacturer:The length of the OT-RS900 should be adjusted accordingly depending on the bicycle frame size. This is necessary for optimal performance. The OT-RS900 should be cut from the correct side when adjusting the length. One of the two ends is flare-processed. This flare-processed end is inserted into the barrel adjuster of the rear derailleur and should therefore remain there.
Technology:OT-RS900
For Dura-Ace RD-R9100, Ultegra RD-R8000, 105 RD-R7000 and other 11-speed road or gravel rear derailleurs, Shimano has developed the special OT-RS900 cable housing. It is less stiff than the conventional OT-SP41 housing and is therefore better suited to the tight curve where the cable is routed from the frame to the rear derailleur. Thanks to OT-RS900, problems with the barrel adjuster can be prevented and the rear wheel can be removed more easily. OT-RS900 is not intended for use on the shift/brake lever side.
Manufacturer Numbers:black:Y-0BM98011white:Y-0BM98021hi-tech grey:Y-0BM98041red:Y-0BM98031Contents:10 x Shimano OT-RS900 shifter cable housing10 x end caps, sealed, for rear derailleur10 x Shimano long pointed end caps